Product Description
Hyundai 120Amp MMA/ARC Inverter Welder, 230V Single Phase | HYMMA-120
Key Characteristics
- Fitted with a 13A fused plug from the United Kingdom
- MMA / ARC Welder with variable DC output from 20Amp to 120Amp
- Electrode sizes range from 1mm to 3.2mm.
- Duty cycle of 70A / 100% / 10 minutes, 120A / 35% / 3.5 minutes
- Thermal overload protection, anti-stick, and hot start functions are included.
- Welder ARC / MMA Single Phase 230v
- Cables, a welding rod holder, and an earth clamp
- Excellent welder for mechanics, mobile techs, farmers, and do-it-yourselfers.
- Hyundai's platinum warranty lasts two years.
- Full UK service and parts operation to keep your welder in good working order for years to come.
- Hyundai MMA / ARC Inverter Welder, 230V Single Phase, 120Amp.
The Hyundai's HYMMA-120 is a lightweight and very adaptable single phase ARC / MMA welder. The HYMMA-120 can weld mild steel up to 6mm thick.
Portable ARC Welder That Is Lightweight
The HYMMA-120 weighs only 6.0kg and is easy to transport thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for increased corrosion resistance. The HYMMA-120 comes with an electrode holder with a 2m cable, an earth clamp with a 1.5m cable, a chipping hammer, and a wire brush, making it incredibly cost effective.
Adjustable ARC Welder for a Wide Range of Materials and Thicknesses
The HYMMA-120 ARC welder has a stepless regulator that allows for limitless variable control of the welding current, as well as a low current facility for successful welding of thinner materials. The HYMMA-120's welding (output) current may be controlled between 20 and 120 amps, making it adaptable to welding different materials and thicknesses of steel.
Welder with a High Duty Cycle
Always check the 'Duty Cycle' to avoid buying low-quality devices. The duty cycle is the amount of time a welder can be utilised on a specific output within a 10-minute period. When used on 120A output, our 120A welder, for example, has a duty cycle of 35%. This indicates that it can be used for three and a half minutes out of every ten minutes.
Duty cycles for the Hyundai welder range shown below:
Model Output Amperage / Duty Cycle / Period of use within 10 minute period
MMA120 70A / 100% / 10minutes 90A / 50% / 6minutes 120A / 35% / 3.5minutes
MMA160 95A / 100% / 10minutes 120A / 50% / 6minutes 160A / 35% / 3.5minutes
MMA200P 155A / 100% / 10minutes 200A / 60% / 6minutes
TIG200 155A / 100% / 10minutes 200A / 60% / 6minutes
Mig180 105A / 100% / 10minutes 140A / 60% / 6minutes 180A / 35% / 3.5minutes
Cheaper, lower-quality welders advertise a specific amperage output but can have a very low duty cycle on that output. Always double-check the duty cycle to ensure you're getting the maximum bang for your buck.
The Benefits of Using an Inverter Welder
When compared to more traditional transformer welders, the inverter technology utilised in Hyundai welders has several advantages. Inverter welders are typically lighter, less expensive, and use less input power for a comparable output. This makes them less expensive not only to buy, but also to run.
Versatile And Safe
Thermal overload protection is included to ensure optimal endurance. Steel, stainless steel, copper, nickel, titanium, and their alloys are all suitable for welding.
The HYMMA-120 is a good all-arounder for welding with rods up to 3.2mm and is ideal for fabricators, farmers, home mechanics, mobile technicians, and DIY enthusiasts. The HYMMA-120 has a high frequency start, which allows for smooth arc strikes.
Service and maintenance costs are low.
The HYMMA-120 is exceptionally simple to use and maintain, thanks to its low service and maintenance requirements, and it comes with complete Hyundai UK parts support.
Inside the Box:
- Electrode holder with a 2m cable is included in the box.
- 5m cable earth clasp
- hammer for chipping
- Wire brush
- Understand your welder
(MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is a manual arc welding procedure that uses a consumable electrode covered with a flux to lay the weld.
Tungsten Inert Gas Welding (TIG) or Gas Tungsten Arc Welding (GTAW) Tungsten Arc Welding is an arc welding technology that produces welds with a non-consumable tungsten electrode.
Metal Inert Gas Welding (MIG), Gas Metal Arc Welding (GMAW), or Metal Active Gas (MAG) is a welding procedure in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), heating the workpiece metal(s) and causing them to melt and unite.
Warranty: Hyundai provides a two-year platinum warranty.
Shop Hyundai 120Amp MMA/ARC Inverter Welder | Buy Inverter Welders Online| Free UK Delivery, Low Price Hyundai Inverter Welders, Excellent Customer Service. Pressure Pump Solutions Pump and Power Products